"WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
news:B45221B5-C5AC-46F2-9FA5-F4A51FE79825@microsoft.com...
> Added a new DC in a new Site and configured the subnet and all.... but the
> NTDS Settings is nto showing up under the Servers??
>
> Helpplz

"Paul Bergson" wrote:

> Did you create a site-link?  Also the KCC on each DC has to have some time
> to generate the new connectors, if you have done this recently give it a few
> hours to perculate.
>
> Configuring a new site
> http://technet2.microsoft.com/WindowsServer/en/Library/1c000ff6-3c18-4ef2-9f61-cac960be48891033.mspx
>
> KCC
> http://support.microsoft.com/Default.aspx?scid=http://www.support.microsoft.com/kb/224815/en-us/
>
>
> --
>
> Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
> news:B45221B5-C5AC-46F2-9FA5-F4A51FE79825@microsoft.com...
> > Added a new DC in a new Site and configured the subnet and all.... but the
> > NTDS Settings is nto showing up under the Servers??
> >
> > Helpplz
>
>
>

"WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
news:F9D7DD72-3A83-41FE-AE8C-3AB520BF719D@microsoft.com...
>I did this last night adn still no go.  SO i deleted it and did it again
> about 15 minutes ago and still no go.  here are no errors what so ever in
> the
> event biewer.  Infact the sysvol folder has completely replcated to this
> DC.
>
>
>
>
> "Paul Bergson" wrote:
>
>> Did you create a site-link?  Also the KCC on each DC has to have some
>> time
>> to generate the new connectors, if you have done this recently give it a
>> few
>> hours to perculate.
>>
>> Configuring a new site
>> http://technet2.microsoft.com/WindowsServer/en/Library/1c000ff6-3c18-4ef2-9f61-cac960be48891033.mspx
>>
>> KCC
>> http://support.microsoft.com/Default.aspx?scid=http://www.support.microsoft.com/kb/224815/en-us/
>>
>>
>> --
>>
>> Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
>>
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>>
>> "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
>> news:B45221B5-C5AC-46F2-9FA5-F4A51FE79825@microsoft.com...
>> > Added a new DC in a new Site and configured the subnet and all.... but
>> > the
>> > NTDS Settings is nto showing up under the Servers??
>> >
>> > Helpplz
>>
>>
>>

"Paul Bergson" wrote:

> Did you follow the link on configuring a new site?  15 minutes isn't enough
> time, give it an hour.
>
> Load upreplmon from the windows support tools, once running and all the dc
> by right clicking on the left windows "Monitored Servers" icon and then
> check the status of all links
>
> If you don't have the tools installed load them from your install disk.
>
> d:\i386\adminpak.msi   (Server tools for remote management of servers)
> d:\support\tools\setup.exe   (Server Utilities)
>
> --
>
> Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
> news:F9D7DD72-3A83-41FE-AE8C-3AB520BF719D@microsoft.com...
> >I did this last night adn still no go.  SO i deleted it and did it again
> > about 15 minutes ago and still no go.  here are no errors what so ever in
> > the
> > event biewer.  Infact the sysvol folder has completely replcated to this
> > DC.
> >
> >
> >
> >
> > "Paul Bergson" wrote:
> >
> >> Did you create a site-link?  Also the KCC on each DC has to have some
> >> time
> >> to generate the new connectors, if you have done this recently give it a
> >> few
> >> hours to perculate.
> >>
> >> Configuring a new site
> >> http://technet2.microsoft.com/WindowsServer/en/Library/1c000ff6-3c18-4ef2-9f61-cac960be48891033.mspx
> >>
> >> KCC
> >> http://support.microsoft.com/Default.aspx?scid=http://www.support.microsoft.com/kb/224815/en-us/
> >>
> >>
> >> --
> >>
> >> Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
> >>
> >> This posting is provided "AS IS" with no warranties, and confers no
> >> rights.
> >>
> >> "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
> >> news:B45221B5-C5AC-46F2-9FA5-F4A51FE79825@microsoft.com...
> >> > Added a new DC in a new Site and configured the subnet and all.... but
> >> > the
> >> > NTDS Settings is nto showing up under the Servers??
> >> >
> >> > Helpplz
> >>
> >>
> >>
>
>
>

"WILDPACKET" wrote:

> I ran replmon and the site name shows up but no server name.
>
> Trying DCDIAG on this new server ..which switch shoudl I use with DCDIAG on
> this new servr.
>
> elplz
>
> "Paul Bergson" wrote:
>
> > Did you follow the link on configuring a new site?  15 minutes isn't enough
> > time, give it an hour.
> >
> > Load upreplmon from the windows support tools, once running and all the dc
> > by right clicking on the left windows "Monitored Servers" icon and then
> > check the status of all links
> >
> > If you don't have the tools installed load them from your install disk.
> >
> > d:\i386\adminpak.msi   (Server tools for remote management of servers)
> > d:\support\tools\setup.exe   (Server Utilities)
> >
> > --
> >
> > Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
> >
> > This posting is provided "AS IS" with no warranties, and confers no rights.
> >
> > "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
> > news:F9D7DD72-3A83-41FE-AE8C-3AB520BF719D@microsoft.com...
> > >I did this last night adn still no go.  SO i deleted it and did it again
> > > about 15 minutes ago and still no go.  here are no errors what so ever in
> > > the
> > > event biewer.  Infact the sysvol folder has completely replcated to this
> > > DC.
> > >
> > >
> > >
> > >
> > > "Paul Bergson" wrote:
> > >
> > >> Did you create a site-link?  Also the KCC on each DC has to have some
> > >> time
> > >> to generate the new connectors, if you have done this recently give it a
> > >> few
> > >> hours to perculate.
> > >>
> > >> Configuring a new site
> > >> http://technet2.microsoft.com/WindowsServer/en/Library/1c000ff6-3c18-4ef2-9f61-cac960be48891033.mspx
> > >>
> > >> KCC
> > >> http://support.microsoft.com/Default.aspx?scid=http://www.support.microsoft.com/kb/224815/en-us/
> > >>
> > >>
> > >> --
> > >>
> > >> Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
> > >>
> > >> This posting is provided "AS IS" with no warranties, and confers no
> > >> rights.
> > >>
> > >> "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
> > >> news:B45221B5-C5AC-46F2-9FA5-F4A51FE79825@microsoft.com...
> > >> > Added a new DC in a new Site and configured the subnet and all.... but
> > >> > the
> > >> > NTDS Settings is nto showing up under the Servers??
> > >> >
> > >> > Helpplz
> > >>
> > >>
> > >>
> >
> >
> >

"WILDPACKET" wrote:

> I ran DCDIAG /V on the probelmatic server and all tests passed.
>
> Still the NTDS is not showing up.
>
> In the Event Viewr I noitced this server has lcoated another GC frm a
> different site.  Iguess bcos this one cannot be a GC unless the NTDS showsup
> and I manullay may it a GC.
>
> elplz
>
> "WILDPACKET" wrote:
>
> > I ran replmon and the site name shows up but no server name.
> >
> > Trying DCDIAG on this new server ..which switch shoudl I use with DCDIAG on
> > this new servr.
> >
> > elplz
> >
> > "Paul Bergson" wrote:
> >
> > > Did you follow the link on configuring a new site?  15 minutes isn't enough
> > > time, give it an hour.
> > >
> > > Load upreplmon from the windows support tools, once running and all the dc
> > > by right clicking on the left windows "Monitored Servers" icon and then
> > > check the status of all links
> > >
> > > If you don't have the tools installed load them from your install disk.
> > >
> > > d:\i386\adminpak.msi   (Server tools for remote management of servers)
> > > d:\support\tools\setup.exe   (Server Utilities)
> > >
> > > --
> > >
> > > Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
> > >
> > > This posting is provided "AS IS" with no warranties, and confers no rights.
> > >
> > > "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
> > > news:F9D7DD72-3A83-41FE-AE8C-3AB520BF719D@microsoft.com...
> > > >I did this last night adn still no go.  SO i deleted it and did it again
> > > > about 15 minutes ago and still no go.  here are no errors what so ever in
> > > > the
> > > > event biewer.  Infact the sysvol folder has completely replcated to this
> > > > DC.
> > > >
> > > >
> > > >
> > > >
> > > > "Paul Bergson" wrote:
> > > >
> > > >> Did you create a site-link?  Also the KCC on each DC has to have some
> > > >> time
> > > >> to generate the new connectors, if you have done this recently give it a
> > > >> few
> > > >> hours to perculate.
> > > >>
> > > >> Configuring a new site
> > > >> http://technet2.microsoft.com/WindowsServer/en/Library/1c000ff6-3c18-4ef2-9f61-cac960be48891033.mspx
> > > >>
> > > >> KCC
> > > >> http://support.microsoft.com/Default.aspx?scid=http://www.support.microsoft.com/kb/224815/en-us/
> > > >>
> > > >>
> > > >> --
> > > >>
> > > >> Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
> > > >>
> > > >> This posting is provided "AS IS" with no warranties, and confers no
> > > >> rights.
> > > >>
> > > >> "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
> > > >> news:B45221B5-C5AC-46F2-9FA5-F4A51FE79825@microsoft.com...
> > > >> > Added a new DC in a new Site and configured the subnet and all.... but
> > > >> > the
> > > >> > NTDS Settings is nto showing up under the Servers??
> > > >> >
> > > >> > Helpplz
> > > >>
> > > >>
> > > >>
> > >
> > >
> > >

"WILDPACKET" wrote:

> here are the steps which took to add the new DC in the new Site.
>
> - on the site I ran DCPROMPO it wen well no errors
> - Added the subnet
> - Created Site
> - Add Site link
> - Then went to add the server name and server then it never showed the NTDS
>
> SYSVL folder replicated flawlessly.
>
> Is this the recommended way or there shoudl be another sequence I should
> follow.
>
> elplz
>
>
>
> "WILDPACKET" wrote:
>
> > I ran DCDIAG /V on the probelmatic server and all tests passed.
> >
> > Still the NTDS is not showing up.
> >
> > In the Event Viewr I noitced this server has lcoated another GC frm a
> > different site.  Iguess bcos this one cannot be a GC unless the NTDS showsup
> > and I manullay may it a GC.
> >
> > elplz
> >
> > "WILDPACKET" wrote:
> >
> > > I ran replmon and the site name shows up but no server name.
> > >
> > > Trying DCDIAG on this new server ..which switch shoudl I use with DCDIAG on
> > > this new servr.
> > >
> > > elplz
> > >
> > > "Paul Bergson" wrote:
> > >
> > > > Did you follow the link on configuring a new site?  15 minutes isn't enough
> > > > time, give it an hour.
> > > >
> > > > Load upreplmon from the windows support tools, once running and all the dc
> > > > by right clicking on the left windows "Monitored Servers" icon and then
> > > > check the status of all links
> > > >
> > > > If you don't have the tools installed load them from your install disk.
> > > >
> > > > d:\i386\adminpak.msi   (Server tools for remote management of servers)
> > > > d:\support\tools\setup.exe   (Server Utilities)
> > > >
> > > > --
> > > >
> > > > Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
> > > >
> > > > This posting is provided "AS IS" with no warranties, and confers no rights.
> > > >
> > > > "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
> > > > news:F9D7DD72-3A83-41FE-AE8C-3AB520BF719D@microsoft.com...
> > > > >I did this last night adn still no go.  SO i deleted it and did it again
> > > > > about 15 minutes ago and still no go.  here are no errors what so ever in
> > > > > the
> > > > > event biewer.  Infact the sysvol folder has completely replcated to this
> > > > > DC.
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > "Paul Bergson" wrote:
> > > > >
> > > > >> Did you create a site-link?  Also the KCC on each DC has to have some
> > > > >> time
> > > > >> to generate the new connectors, if you have done this recently give it a
> > > > >> few
> > > > >> hours to perculate.
> > > > >>
> > > > >> Configuring a new site
> > > > >> http://technet2.microsoft.com/WindowsServer/en/Library/1c000ff6-3c18-4ef2-9f61-cac960be48891033.mspx
> > > > >>
> > > > >> KCC
> > > > >> http://support.microsoft.com/Default.aspx?scid=http://www.support.microsoft.com/kb/224815/en-us/
> > > > >>
> > > > >>
> > > > >> --
> > > > >>
> > > > >> Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
> > > > >>
> > > > >> This posting is provided "AS IS" with no warranties, and confers no
> > > > >> rights.
> > > > >>
> > > > >> "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
> > > > >> news:B45221B5-C5AC-46F2-9FA5-F4A51FE79825@microsoft.com...
> > > > >> > Added a new DC in a new Site and configured the subnet and all.... but
> > > > >> > the
> > > > >> > NTDS Settings is nto showing up under the Servers??
> > > > >> >
> > > > >> > Helpplz
> > > > >>
> > > > >>
> > > > >>
> > > >
> > > >
> > > >

"WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
news:5E4E79A3-4BCB-4F2D-AE06-B20B5AC579CD@microsoft.com...
> ok.  Got it working.
>
> Demoted and prmoted it again an all is cool.
>
> Tnx though Paul fo ryour support.
>
>
>
>
> "WILDPACKET" wrote:
>
>> here are the steps which took to add the new DC in the new Site.
>>
>> - on the site I ran DCPROMPO it wen well no errors
>> - Added the subnet
>> - Created Site
>> - Add Site link
>> - Then went to add the server name and server then it never showed the
>> NTDS
>>
>> SYSVL folder replicated flawlessly.
>>
>> Is this the recommended way or there shoudl be another sequence I should
>> follow.
>>
>> elplz
>>
>>
>>
>> "WILDPACKET" wrote:
>>
>> > I ran DCDIAG /V on the probelmatic server and all tests passed.
>> >
>> > Still the NTDS is not showing up.
>> >
>> > In the Event Viewr I noitced this server has lcoated another GC frm a
>> > different site.  Iguess bcos this one cannot be a GC unless the NTDS
>> > showsup
>> > and I manullay may it a GC.
>> >
>> > elplz
>> >
>> > "WILDPACKET" wrote:
>> >
>> > > I ran replmon and the site name shows up but no server name.
>> > >
>> > > Trying DCDIAG on this new server ..which switch shoudl I use with
>> > > DCDIAG on
>> > > this new servr.
>> > >
>> > > elplz
>> > >
>> > > "Paul Bergson" wrote:
>> > >
>> > > > Did you follow the link on configuring a new site?  15 minutes
>> > > > isn't enough
>> > > > time, give it an hour.
>> > > >
>> > > > Load upreplmon from the windows support tools, once running and all
>> > > > the dc
>> > > > by right clicking on the left windows "Monitored Servers" icon and
>> > > > then
>> > > > check the status of all links
>> > > >
>> > > > If you don't have the tools installed load them from your install
>> > > > disk.
>> > > >
>> > > > d:\i386\adminpak.msi   (Server tools for remote management of
>> > > > servers)
>> > > > d:\support\tools\setup.exe   (Server Utilities)
>> > > >
>> > > > --
>> > > >
>> > > > Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
>> > > >
>> > > > This posting is provided "AS IS" with no warranties, and confers no
>> > > > rights.
>> > > >
>> > > > "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in
>> > > > message
>> > > > news:F9D7DD72-3A83-41FE-AE8C-3AB520BF719D@microsoft.com...
>> > > > >I did this last night adn still no go.  SO i deleted it and did it
>> > > > >again
>> > > > > about 15 minutes ago and still no go.  here are no errors what so
>> > > > > ever in
>> > > > > the
>> > > > > event biewer.  Infact the sysvol folder has completely replcated
>> > > > > to this
>> > > > > DC.
>> > > > >
>> > > > >
>> > > > >
>> > > > >
>> > > > > "Paul Bergson" wrote:
>> > > > >
>> > > > >> Did you create a site-link?  Also the KCC on each DC has to have
>> > > > >> some
>> > > > >> time
>> > > > >> to generate the new connectors, if you have done this recently
>> > > > >> give it a
>> > > > >> few
>> > > > >> hours to perculate.
>> > > > >>
>> > > > >> Configuring a new site
>> > > > >> http://technet2.microsoft.com/WindowsServer/en/Library/1c000ff6-3c18-4ef2-9f61-cac960be48891033.mspx
>> > > > >>
>> > > > >> KCC
>> > > > >> http://support.microsoft.com/Default.aspx?scid=http://www.support.microsoft.com/kb/224815/en-us/
>> > > > >>
>> > > > >>
>> > > > >> --
>> > > > >>
>> > > > >> Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
>> > > > >>
>> > > > >> This posting is provided "AS IS" with no warranties, and confers
>> > > > >> no
>> > > > >> rights.
>> > > > >>
>> > > > >> "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in
>> > > > >> message
>> > > > >> news:B45221B5-C5AC-46F2-9FA5-F4A51FE79825@microsoft.com...
>> > > > >> > Added a new DC in a new Site and configured the subnet and
>> > > > >> > all.... but
>> > > > >> > the
>> > > > >> > NTDS Settings is nto showing up under the Servers??
>> > > > >> >
>> > > > >> > Helpplz
>> > > > >>
>> > > > >>
>> > > > >>
>> > > >
>> > > >
>> > > >

"Paul Bergson" <pbergson@allete_nospam.com> wrote in message
news:%23CYhYYPLGHA.2812@TK2MSFTNGP14.phx.gbl...
> Sorry man I have been extremely busy today.  Doing work on distant sites
> and having issues.
>
> --
>
> Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
>
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
> "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in message
> news:5E4E79A3-4BCB-4F2D-AE06-B20B5AC579CD@microsoft.com...
>> ok.  Got it working.
>>
>> Demoted and prmoted it again an all is cool.
>>
>> Tnx though Paul fo ryour support.
>>
>>
>>
>>
>> "WILDPACKET" wrote:
>>
>>> here are the steps which took to add the new DC in the new Site.
>>>
>>> - on the site I ran DCPROMPO it wen well no errors
>>> - Added the subnet
>>> - Created Site
>>> - Add Site link
>>> - Then went to add the server name and server then it never showed the
>>> NTDS
>>>
>>> SYSVL folder replicated flawlessly.
>>>
>>> Is this the recommended way or there shoudl be another sequence I should
>>> follow.
>>>
>>> elplz
>>>
>>>
>>>
>>> "WILDPACKET" wrote:
>>>
>>> > I ran DCDIAG /V on the probelmatic server and all tests passed.
>>> >
>>> > Still the NTDS is not showing up.
>>> >
>>> > In the Event Viewr I noitced this server has lcoated another GC frm a
>>> > different site.  Iguess bcos this one cannot be a GC unless the NTDS
>>> > showsup
>>> > and I manullay may it a GC.
>>> >
>>> > elplz
>>> >
>>> > "WILDPACKET" wrote:
>>> >
>>> > > I ran replmon and the site name shows up but no server name.
>>> > >
>>> > > Trying DCDIAG on this new server ..which switch shoudl I use with
>>> > > DCDIAG on
>>> > > this new servr.
>>> > >
>>> > > elplz
>>> > >
>>> > > "Paul Bergson" wrote:
>>> > >
>>> > > > Did you follow the link on configuring a new site?  15 minutes
>>> > > > isn't enough
>>> > > > time, give it an hour.
>>> > > >
>>> > > > Load upreplmon from the windows support tools, once running and
>>> > > > all the dc
>>> > > > by right clicking on the left windows "Monitored Servers" icon and
>>> > > > then
>>> > > > check the status of all links
>>> > > >
>>> > > > If you don't have the tools installed load them from your install
>>> > > > disk.
>>> > > >
>>> > > > d:\i386\adminpak.msi   (Server tools for remote management of
>>> > > > servers)
>>> > > > d:\support\tools\setup.exe   (Server Utilities)
>>> > > >
>>> > > > --
>>> > > >
>>> > > > Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
>>> > > >
>>> > > > This posting is provided "AS IS" with no warranties, and confers
>>> > > > no rights.
>>> > > >
>>> > > > "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in
>>> > > > message
>>> > > > news:F9D7DD72-3A83-41FE-AE8C-3AB520BF719D@microsoft.com...
>>> > > > >I did this last night adn still no go.  SO i deleted it and did
>>> > > > >it again
>>> > > > > about 15 minutes ago and still no go.  here are no errors what
>>> > > > > so ever in
>>> > > > > the
>>> > > > > event biewer.  Infact the sysvol folder has completely replcated
>>> > > > > to this
>>> > > > > DC.
>>> > > > >
>>> > > > >
>>> > > > >
>>> > > > >
>>> > > > > "Paul Bergson" wrote:
>>> > > > >
>>> > > > >> Did you create a site-link?  Also the KCC on each DC has to
>>> > > > >> have some
>>> > > > >> time
>>> > > > >> to generate the new connectors, if you have done this recently
>>> > > > >> give it a
>>> > > > >> few
>>> > > > >> hours to perculate.
>>> > > > >>
>>> > > > >> Configuring a new site
>>> > > > >> http://technet2.microsoft.com/WindowsServer/en/Library/1c000ff6-3c18-4ef2-9f61-cac960be48891033.mspx
>>> > > > >>
>>> > > > >> KCC
>>> > > > >> http://support.microsoft.com/Default.aspx?scid=http://www.support.microsoft.com/kb/224815/en-us/
>>> > > > >>
>>> > > > >>
>>> > > > >> --
>>> > > > >>
>>> > > > >> Paul Bergson  MCT, MCSE, MCSA, CNE, CNA, CCA
>>> > > > >>
>>> > > > >> This posting is provided "AS IS" with no warranties, and
>>> > > > >> confers no
>>> > > > >> rights.
>>> > > > >>
>>> > > > >> "WILDPACKET" <WILDPAC***@discussions.microsoft.com> wrote in
>>> > > > >> message
>>> > > > >> news:B45221B5-C5AC-46F2-9FA5-F4A51FE79825@microsoft.com...
>>> > > > >> > Added a new DC in a new Site and configured the subnet and
>>> > > > >> > all.... but
>>> > > > >> > the
>>> > > > >> > NTDS Settings is nto showing up under the Servers??
>>> > > > >> >
>>> > > > >> > Helpplz
>>> > > > >>
>>> > > > >>
>>> > > > >>
>>> > > >
>>> > > >
>>> > > >
>
>